Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 45)

Chapter 5
Using Screen Builder
5–3
3. Press [F8] on any screen to access the other screen types. You are
prompted for a screen number:
Press [F6] to go to the next available unused screen or [F8] to view the
contents of the next programmed screen.
4. If you enter any screen number other than screen #1 (main menu screen),
you are prompted for a screen type:
5. Select a screen type. A Screen Builder for the selected screen type is
then displayed. Refer to Chapters 6 through 11.
Screen Type Chapter
Menus and Sub-Menus 6
Data Displays 7
Data Entry 8
Security 9
Recipe 10
Bar Graph ➀ 11
➀ DTAM Plus only.