Rockwell Automation 2707-NP DTAM Programming Software User Manual
Page 88
Advertising
Chapter 10
Creating Recipe Screens
10–4
4. Select a register type.
You are prompted to enter the registers and the values you want to write.
5. Enter the register address and press [Return]. Enter the value to send and
press [Return]. Repeat for up to 9 more addresses that you want to write
at download.
6. After entering the download data and addresses, press [Esc] to accept
the data.
7. Enter the screen text. If an operator prompt was selected, you cannot edit
the prompt text.
8. Press [F9] to save the screen.
Advertising