Assigning bit write functions – Rockwell Automation 2707-NP DTAM Programming Software User Manual
Page 137
Advertising
Chapter 16
DTAM Micro
Function Key Builder
16–5
To assign bit write mode functions:
1. Open the Function Key Builder screen, refer to previous section.
2. Press [F5] to assign the bit write mode register.
You are prompted to enter a base register.
3. Enter the base register number (for function key F1), the next seven
registers will automatically be reserved for function keys F2 through F8.
You are prompted to clear or set a bit when the operator presses the
function key.
4. Enter [1] or [0] and press [Esc] when done.
The function key register assignments are displayed.
5. Press [F9] to save the screen.
Assigning
Bit Write Functions
Advertising