Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 56)

Chapter 6
Creating Menu and
Sub-Menu Screens
6–4
To create a menu screen:
1. Select Screen Builder from the Edit File - Option Selection menu.
The screen builder for the main menu (screen #1) is displayed.
2. If you are creating a sub-menu, press [F8], enter the screen number, and
select a sub-menu screen type.
The screen builder for a sub-menu is displayed. The sub-menu screen
builder is the same as the main screen (shown above).
3. Enter the screen text. The sequence, length and location of the text does
not matter but make sure you number each menu item (1 through 8).
Enter menu
text.
4. Press [F9] to save the screen.
Note: You can’t link screens to a menu until all of the application screens
have been created. Chapter 12 describes how to link screens to a menu.
Creating a
Menu Screen