Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 26)

Chapter 3
Designing DTAM Plus and
DTAM Micro Applications
3–2
Both the applications are created using DPS. The development of
applications for the DTAM Micro and DTAM Plus is very similar. This
manual shows screens for DTAM Plus applications, the DTAM Micro
screens are similar unless noted. The differences in application development
are related to differences in the operator terminals. The following table lists
these differences.
Function DTAM Plus DTAM Micro
Screen Capacity Up to 244 Screens Up to 244 Screens
Terminal Mode Yes No
Function Key Screen Selection No Yes
Alarm LED Yes No
Background Monitor Yes No
Application Upgrade / Downgrade Yes No
Contrast / Backlight Adjustment Yes No
Time / Date Functions Yes No
PID File Operations Yes No
SFC File Operations Yes No
Block Transfer File Operations Yes No
Floating Point File Operation Yes No
Bargraph Display Yes No
[Y], [N], [PREV MENU] keys Yes No
Printer Port Yes No
The main difference in designing DTAM Micro and DTAM Plus applications
is the screen size.
DTAM Plus
4 Lines x 20 Characters
DTAM Micro
2 Lines x 20 Characters
DTAM Plus /
DTAM Micro Comparison