Installing dtam programming software – Rockwell Automation 2707-NP DTAM Programming Software User Manual
Page 16
Advertising
Chapter 2
Installing / Running
DTAM Programming Software
2–4
5. Press any key (other than [Esc]) to continue.
This screen appears.
6. Use the [
"][#] arrow keys to highlight the drive on which you want to
install DPS and then press [Return]. The default drive is C:
This screen appears.
Installing DTAM
Programming Software
☞ You cannot install the DPS soft-
ware on the same drive on which
the Install program resides.
Advertising