Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 47)

Chapter 5
Using Screen Builder
5–5
Use the copy function [F4] to save time when creating similar screens. Both
the source screen and the destination screen must be of the same type. For
example, you can’t copy Data Entry screen text into a Data Display screen.
When you copy a screen, all register data and display text is also copied.
Edit the screen as needed after copying.
To copy a screen:
1. Open the screen you want to copy the screen to or from. In this example
a Data Display screen:
2. Press [F4].
You are prompted for the screen to copy to or from:
3. Press [F1] to copy the current screen to another screen. Press [F2] to
copy another screen to the current screen.
You are prompted for a screen number.
4. Enter the screen number and press [Return].
The screen is copied.
5. Edit the copied screen text and/or register data, refer to descriptions of
individual screen types (Chapters 6 through 11).
Copying Screens