Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 97)

Chapter 12
Linking Menu and Application Screens
12–3
When you press [F3] MAP Screen on a non-menu screen, the screen linking
function keys are active. Shown below is an example using a bar graph
screen, the other screen types are similar.
Screen Link
Function Keys
Current
Links
Screen Linking Function Keys
Applies to:
Function
Key Designation
DTAM
Plus
DTAM
Micro Function
[F1] INSERT LINK
✓ ✓
Inserts a link between two screens. This link is
bi-directional, an operator can toggle between
the screens using the [NEXT] and [PREV] keys.
[F3] INSERT
GOTO
✓ ✓
Inserts Goto link between two screens. This is a
one way link, an operator cannot return to the
previous screen by pressing [PREV].
[F5] DELETE
MAPPING
✓ ✓ Deletes all links to the current screen.
[F7] DELETE
NEXT ✓ ✓
Deletes the link established for the next screen
only. On two-way links this also deletes the link
to the screen previous to the current screen.
When you press [F3] MAP Screen on a main or sub-menu screen, the
current screen links are displayed. Items 1 through 8 correspond with
keypad keys [1] through [8]. Screens are linked by entering a screen number.
Current
Links
Application Screen
Linking Function Keys
Menu and Sub-Menu
Linkage Display