Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 85)

A–B
10
Chapter
10–1
Creating Recipe Screens
This chapter describes how to create recipe screens.
Section Page
Recipe Screens 10–1
Recipe Screen Builder 10–2
Creating a Recipe Screen 10–3
Recipe Screens allow an operator to download a block of data for up to 10
register addresses. These addresses can be in any order. Multiple recipe
screens may be linked together in sequential order to download more than 10
register addresses, or to download more than one data format. You can
choose to initiate the download automatically or manually (with a prompt).
If recipe screens are linked together, successive screens linked to the first
recipe screen are downloaded immediately following the first screen. The
operator prompt enabled for the first screen prompts the operator to
acknowledge the recipe download. If the other linked recipes do not have the
operator prompt enabled they are sent automatically. This appears to the
operator as though all recipes were sent as one large recipe.
There is only one exception to the immediate download of successive recipe
screens. If an alarm is initiated before all recipe screens are finished, the
alarm screen is displayed, temporarily halting the download. As soon as the
operator acknowledges the alarm, downloading of the recipe continues until
completed.
Chapter Objectives
Recipe Screens