Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 142)

Chapter 17
DTAM Plus
Printer Form Builder
17–4
4. Enter a carriage width. The carriage width affects all printer forms.
The printer form screen builder is displayed.
5. Enter the text you want to appear on the print form. If you want to insert
a data display, press [F1]. You are then prompted for the register data,
refer to Chapter 7 for additional information.
6. If you want to insert the time or date, press [F5] or [F6].
7. Press [F2] to change the printer control.
You are prompted to press [F1] for a form feed prior to the form being
printed or [F3] for printer codes to be used.
8. If you want to enter a printer code, position the cursor where you want to
enter the code and press [F3] after printer control [F2] has been selected.
You are prompted for the printer code.