Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 13)

Publication 2711-QS003D-EN-P - June 2009 13
Preface
Personal Computer
These are the minimum requirements for running PanelBuilder32
software:
•
100MHz Pentium Class 2 or greater PC compatible
•
30 MB free hard disk space required for a minimum installation
•
270 MB free hard disk space required for a full package
installation
•
32 MB of installed RAM (48 MB RAM recommended)
•
CD-ROM drive
•
500K free conventional memory
Software
Besides PanelBuilder32 software, you will also need to load the
applicable controller programming and network configuration
software.
SLC or MicroLogix
Advanced Programming Software (APS), SLC-500 AI Software, RSLogix
500 software
PLC
6200 Series Programming Software, PLC-5 AI Software, RSLogix 5
software
ControlLogix
•
RSLogix 5000 software, version 2.01 or greater
•
RSNetWorx for DeviceNet or DeviceNet Manager
•
RSNetWorx for ControlNet