Sample application and ladder logic – Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 14
14
Publication 2711-QS003D-EN-P - June 2009
Preface
Sample Application and Ladder Logic
The PanelBuilder32 installation CD contains:
•
sample applications (.PBA) for each of the PanelView terminals.
•
ladder logic to run the application for each of the
communication protocols.
Refer to
, for a list of these files.
PanelBuilder32 application (.pba) files are located in the Quick
Start\PV directory on the PanelBuilder32 installation CD.
Ladder logic program (.rss, .rsp, .acd) files are located in the Quick
Start\SLC, \ML, \CL or \PLC directories on the PanelBuilder32
installation CD.
All other program files, such as DeviceNet SDN, scanner files are
located in the Quick Start\DNet, or \CNet directories on the
PanelBuilder32 installation CD.
IMPORTANT
Installing the sample applications on your computer’s hard
drive is an option available during the installation of
PanelBuilder32 software. If these files were not installed, you
can still access them off the installation CD from the autorun
menu.