Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 15)

15 Publication 2711-QS003D-EN-P - June 2009 15
Chapter
1
System Setup
PanelView terminals offer many communication options. In this
chapter, we provide a brief summary of the minimum equipment
setups required to run the sample application. For specifics such as
cable termination and baud rates, we recommend that you refer to the
user manual for your terminal. Refer to the section that applies to your
terminal type.
•
DH-485
•
RS-232 (DH485)
•
RS-232 (DF1)
•
RIO
•
DH+
•
DeviceNet
•
ControlNet
•
EtherNet/IP
Safety Guidelines Refer to the PanelView Standard Operator Terminals User Manual,
publication
2711-UM014 , for installation instructions and safety
precautions.
If you are running this sample application as a pre-installation desktop
setup, the same safety precautions still apply. Make sure that you
disconnect power from devices prior to making communication
connections.