Create objects on the set motor speed screen – Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 45
Publication 2711-QS003D-EN-P - June 2009
45
Creating the Application Chapter 3
Create Objects on the Set
Motor Speed Screen
The Set Motor Speed screen contains a numeric entry object, a screen
navigation button, and a screen title.
Create a Numeric Entry Object to Set the Motor Speed
1. Open the Set Motor Speed screen (Screen 2) by clicking on the
title bar of the minimized screen.
2. Select Objects>Numeric Entry>Cursor Point.
3. Position the pointer (+) in the middle of the screen, hold down
the left mouse button and drag to draw the object.
The object is created with six ###### characters as a placeholder
for the numeric value. Each # represents a digit. The initial field
width is 6 digits.
4. Select Format>Toggle Fore/Background to reverse the object
colors.
Numeric Entry Cursor Point
######