Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 63)

63 Publication 2711-QS003D-EN-P - June 2009 63
Chapter
5
Entering Application Tags
This chapter shows how to:
•
open the tag editor.
•
enter tags in the worksheet for each communication protocol.
•
save the tags.
Open the Tag Editor Follow these steps to open the tag editor:
•
Select Tools>Tag Editor.
•
Or open the System folder in the Application window and
double-click on the Tag Editor icon.
A blank worksheet opens with the protocol name on its tab. The
tag editor has its own menu bar and toolbar that remains active
until you close the tag editor.
Scrolls tabs to
left or right Scrolls columns
to left or right
Worksheet tab
identifies protocol
Tag fields