Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 69)

69 Publication 2711-QS003D-EN-P - June 2009 69
Chapter
6
Downloading the Application
This chapter shows how to:
•
validate the application.
•
download the application using a point-to-point serial
connection.
•
close the application.
Check the Application for
Errors This section shows you how to validate the application for errors. The
application is also validated automatically during the download
process.
1. Select Application>Validate All. The application is checked for
errors.
If the application passes validation, you’ll see this dialog.
2. Click OK.
If any errors or warnings occur, the Exceptions window opens. Errors
must be corrected, before you can download the application.
Warnings are optional.
After clearing errors, you can reopen the Exceptions window by
double-clicking the Exceptions window in the System folder of the
Application window.
To get additional help on validating an application, select
Help>Contents. Select the Index tab and enter the search words
validate application.
Click to close window.
Double-click on any error or warning to
navigate to the source of the error.
To get help, select an error and click F1 or
select Exceptions>Details.