Create a new application – Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 32
Advertising
32
Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
Create a New application
1. From the startup dialog, select Create a new application and
click OK.
2. In the Create New Application dialog, enter a name for your
application and select a PanelView terminal (type, protocol and
type of operator input)
.
3. Click OK to exit the dialog.
The Application window opens showing the name of the
application in the title bar. A blank screen opens with a default
name and number - Screen 1.
Type Sample
Select a terminal type
Select a protocol
Select the type of
operator input
Screens are stored in the
Screens folder.
Application
window
Advertising