Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 71
Publication 2711-QS003D-EN-P - June 2009
71
Downloading the Application Chapter 6
Follow these steps to download an application from your computer to
a DH485 or RS-232 (DH485 protocol) PanelView terminal using the
RSLinx Classic 1747-PIC Device driver. RSLinx Classic is installed as
part of the PanelBuilder32 installation.
Check your cable connections as shown in Chapter 1.
1. Configure the1747-PIC driver as described in steps 2 through 5.
2. Select File>Workstation Setup and then select Configure RSLinx
Classic drivers from the Workstation Setup dialog.
The Configure Drivers dialog opens.
3. Select 1747-PIC /AIC+ Device from the pull-down menu and click Add
New.
You are prompted to enter a driver name.
IMPORTANT
The DF1 driver will not be available if any of the serial ports on your
computer are configured to use an RSLinx Classic driver.