Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 70)

70 Publication 2711-QS003D-EN-P - June 2009
Chapter 6 Downloading the Application
Download the Application Follow these steps to download an application from your computer to
a DH+, RIO, ControlNet, DeviceNet, or EtherNet/IP PanelView
terminal using a point-to-point serial connection and PanelBuilder32’s
DF1 driver.
Check your cable connections as shown in Chapter 1.
1. Select File>Download.
The Download File dialog opens. It shows the name of the
application and the driver used to download the application.
2. Click OK.
The application is validated, checked for errors, then
downloaded to the terminal. A dialog opens to show the status
of the download.
When the download is complete, the terminal resets, verifies and
displays the startup screen of the application.
Settings should be as follows to
match fixed settings of terminal.
You can monitor
the progress of
each download
tasks.
Errors appear here.