Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 50)

50 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
Define an Alarm Trigger
This section defines the trigger tag. When an alarm condition occurs, a
value is sent to the trigger tag address.
1. Double-click the Alarm Triggers icon in the Alarms folder.
Or select Application>Alarm Setup, then select the Alarm
Triggers tab.
2. Type Speed_Alarm in the Trigger Tag field.
3. Select Bit from the Trigger Type field.
Defining Alarm Messages
1. Select the Alarm Messages tab on the Alarms dialog.
Each row defines an alarm message and its attributes.
2. Right-click and select Append Alarm from the shortcut menu to
add a row.