Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 54)

54 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
3. Select the PanelView terminal for which you want to convert the
application.
4. When you click OK, the application is converted and validated
for any errors.
If the application is converted successfully, the Exceptions
window shows the message:
[Application] Conversion Passed - No Errors Found
If the terminal uses a different protocol, you can select the Convert
option on the Edit Tag tab of the Tools>Options dialog and the tag
editor will convert the current tags to the appropriate fields for the
new protocol. You still need to update the tag data.
IMPORTANT
Depending on the terminal size, you may want to reposition and
resize objects appropriately. You may also want to adjust the
text sizes.