Create objects on the motor status screen, Create the start motor push button – Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 35
Advertising
Publication 2711-QS003D-EN-P - June 2009
35
Creating the Application Chapter 3
Create Objects on the
Motor Status Screen
The Motor Status screen contains a start motor push button, stop
motor push button, screen navigation button, motor speed display,
motor status indicator, and a screen title.
Create the Start Motor Push Button
1. Select Objects>Push Buttons>Momentary.
2. Position the pointer (+) in the lower left of the screen where you
want to draw the button, hold down the left mouse button and
drag to size the button.
3. Double-click the object to open its dialog and set the properties
shown.
Click Single Bit
Select F1
Type
TIP
You will enter definitions for tags in Chapter 5,
.
Advertising