Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 23)

Publication 2711-QS003D-EN-P - June 2009 23
System Setup Chapter 1
EtherNet/IP Connections EtherNet/IP versions of the PanelView terminal have both an Ethernet
port and an RS-232 port for file transfers/printing. Connect the
PanelView terminal to a ControlLogix controller with a 1756-ENET/B
or ENBx module, a PLC-5E controller, or an SLC 5/05 controller. The
EtherNet/IP network uses a Category 5 shielded and non-shielded
twisted-pair cable with RJ45 connectors.
Controller Ladder Logic The controller logic programs for running the sample application are
already created for you. The files are provided on the PanelBuilder32
installation CD. Refer to
Appendix A , Application Programs , for a list
of these files.
ControlLogix Controller
PanelView Standard Terminal
10.0.0.2
Switch
1756-ENET/B
10.0.0.1
PLC-5E Controller
10.0.0.1
Serial Link
Cable
2711-NC13, 2711-NC14,
2706-NC13
PanelBuilder32 Software
SLC 5/05 Controller
10.0.0.1
OR
OR