Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 16)

16 Publication 2711-QS003D-EN-P - June 2009
Chapter 1 System Setup
DH-485 Connections DH-485 PanelView terminals communicate with external devices
through either the DH-485 communication port or DH-485
programming connector. Some DH-485 terminals have an RS-232 port
for printing.
Serial Port
Node 0
Personal Computer
PanelBuilder32 Software
Node 2
PanelView 1000 DH-485 Terminal Shown
DH-485
Programming
Connector
DH-485
Communication
Connector
1747-PIC
Personal Computer
Interface Converter
Cable
1747-C10, -C11, -C20
Node 1
SLC Controller
COM1 or COM2