Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 81)

Publication 2711-QS003D-EN-P - June 2009 81
Application Programs Appendix A
Ladder Logic Programs Ladder logic files are provided on the PanelBuilder32 installation CD.
ControlLogix Controller Programs (\QuickStart\CL directory)
File Name Use with this Application Page
cnet_sch.acd
•
ControlLogix in slot 0
•
ControlLogix 1756-CNB module in slot 1
•
Scheduled messages
83
cnet_unsch.acd
•
ControlLogix in slot 0
•
ControlLogix 1756-CNB module in slot 1
•
Unscheduled messages
84
dhp.acd
•
ControlLogix in slot 0
•
1756-DHRIO module in slot 1
•
Channel 1 of DHRIO set for 57.6K baud
85
dnet.acd
•
ControlLogix in slot 0
•
ControlLogix 1756-DNB module in slot 1
•
Baud rate set at 125K
86
rio.acd
•
ControlLogix in slot 0
•
IP Address is 10.0.0.1
•
1756-DHRIO module in slot 1
•
Channel 2 of DHRIO set for 57.6K baud
87
enet.acd
•
ControlLogix in slot 0
•
1756-ENET/B module in slot 1
•
Network Addressing is message type
88
PLC-5 Controller Programs (\QuickStart\PLC directory)
File Name Use with this Application Page
cnet.rsp
•
PLC-5C controller 106
dhp_df1.rsp
•
Any enhanced PLC-5 controller for DF1
•
Any PLC-5 controller for DH+
108
dnet.rsp
•
Any PLC-5 controller
•
1771-SDN DeviceNet scanner in slot 1
110
rio.rsp
•
Any PLC-5 controller
•
Remote I/O port
112
enet.rsp
•
PLC-5E (Ethernet) controller
•
IP Address is 10.0.0.1
114