Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 37)

Publication 2711-QS003D-EN-P - June 2009 37
Creating the Application Chapter 3
Create the Stop Motor Push Button
The Stop Motor push button is created using copy and paste
commands.
1. Select the Start Motor button, if not selected.
2. Select Edit>Copy or click the Copy tool on the toolbar.
3. Select Edit>Paste or click the Paste tool on the toolbar.
An outline of the button appears.
4. Move the outline to the right of the Start Motor push button and
click the left mouse button to paste it on the screen.
5. Double-click the pasted button to open its dialog and set the
properties shown.
The F1 and F2 keys both have
icons showing they are currently
assigned to objects.
Replace Start_Motor
with Stop_Motor
Select F2