Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 20)

20 Publication 2711-QS003D-EN-P - June 2009
Chapter 1 System Setup
DH+ Connections DH+ versions of the PanelView terminal have a DH+ communication
port and an RS-232 file transfer/printer port. Connect the PanelView
terminal to a DH+ link using Belden 9463 twin-axial cable, catalog
number 1770-CD.
Cable
2711-NC13, 2711-NC14,
2706-NC13
Node 0
Personal Computer
PanelBuilder32 Software
Node 1
PLC-5 Controller
PLC DH+ Port
ControlLogix Controller
DH+ Module
SLC 5/04 Controller
Serial Port
(COM1 or COM2)
Clear 1
Shield SH
Blue 2
Clear 1
Shield SH
Blue 2
Clear 1
Shield SH
Blue 2
Node 2
PanelView 1000 RS-232
RS-232 Port
DH+ Port
3-Pin Terminal Block
1 Clear
SH Shield
2 Blue
82 or 150 Ohm
termination resistor