Close the screens, Define the startup screen for the application – Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual User Manual
Page 52
Advertising
52
Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
Close the Screens
Close each screen by clicking the X in the title bar of the screen. Or
select Screen>Close to close each screen.
Or select Windows>Close all Current Application Screens to close all
screens.
Define the Startup Screen
for the Application
1. Select Application>Settings.
2. Select the Power-Up tab.
3. From the Startup Screen list box, select Motor Status.
4. Click OK to exit the dialog.
Select Motor Status
Advertising