Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 46)

46 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
5. Double-click the object and set the properties as shown.
6. Click OK to close the dialog.
The object shows four #### characters as the maximum field
width for the numeric value.
7. Select Objects>Text.
8. Position the pointer (+) above the numeric entry object, hold
down the left mouse button and drag to draw the text box.
You are placed in text mode.
9. Enter the text as shown; the text it is also entered in the text
box.
10. Click the Toggle Fore/Background tool to reverse the
foreground and background colors of the object.
11. Deselect the object by clicking anywhere outside the object.
Type
Set_Max_Motor_Speed
Select 4
TIP
An asterisk (*) appears if the text box is too small for the text.
Select the object and then drag a handle to size the text box
until the text fits.