Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 40)

40 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
7. Double-click the Motor Speed screen button.
8. Select the properties as shown.
9. Click OK to exit the dialog.
Create the Motor Speed Display
1. Select Objects>Numeric Data Display.
2. Position the pointer (+) above the Motor Speed screen button.
Hold down the left mouse button and drag to size the button.
The object is created with ###### characters as a placeholder for
the numeric value. Each # represents a digit. The initial field
width is six digits.
3. Select Format>Toggle Fore/Background to reverse the object
colors.
Select Set Motor Speed
This is the screen that displays when the
operator presses the F3 key on the Motor
Status screen.
Text
Numeric Data Display
####