Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 47)

Publication 2711-QS003D-EN-P - June 2009 47
Creating the Application Chapter 3
Create the Motor Status Screen Button
The Motor Status screen button is created by copying the Motor Speed
screen button from screen 1 and then editing the button properties.
1. Select the Motor Speed screen button on the Motor Status
screen.
Click anywhere in the Motor Speed screen to activate the screen.
2. Select Edit>Copy or click the Copy tool on the toolbar.
3. Click in the Set Motor Speed screen, or screen 2.
4. Select Edit>Paste or click the Paste on the toolbar.
An outline of the button appears.
5. Move the object to the lower right of the screen and click the left
mouse button to paste it.
6. Click the Inner Text tool to edit the text in the button; replace
the current text with the new text as shown.
7. Double-click the object to open its dialog.
8. Click OK to exit the dialog.
MOTOR
SPEED
F3
Edit text to look like this.
Select Goto Specific Screen
Select Motor Status
This is the screen that displays when
the operator presses the F2 key on the
Set Motor Speed screen.