Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 36)

36 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
4. Click the States tab of the Push Buttons dialog.
Each row defines text and formatting options for a push button
state. Row 0 is state 0, row 1 is state 1. The default text for a
2-state push button is ST 0 and ST 1.
5. Double-click in the Message Text field of each row and change
the text as shown below. Also, change the default colors for the
object and text.
6. Click OK when done to exit dialog. The F1 key shows an icon of
the push button indicating the key is assigned to an object.
If you see an asterisk (*), the object is too small to fit the text.
Click on the object and drag a handle until all of the text fits.
State 0
State 1
Select White for Text Background
Select Blue for Object Foreground
Select Blue for Text Foreground
Select White for Object Background
Press Enter to start a new line. /*R*/ indicates a return.
Start Motor
State 0 State 1
Start