Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 53)

Publication 2711-QS003D-EN-P - June 2009 53
Creating the Application Chapter 3
Save the Application 1. Select File>Save or click the Save icon on the toolbar.
The file is saved to a default location using the application name
and the .PBA file type.
2. Click the Save button to exit and save the application.
The file is saved to Program
Files>Allen-Bradley>PanelBuilder32>Applications.
Convert Application for
Another Terminal Type The sample application was created for the PanelView 600 keypad
terminal and is available for DH-485, DH+, DF1, Remote I/O,
DeviceNet, EtherNet/IP, and ControlNet protocols. You can convert
any one these applications to another terminal size such as the
PanelView 1000 by following this procedure.
1. Select Application>Settings.
2. Click the Setup tab.
TIP
The next time you select File>Save the Save As dialog
doesn’t open. The file is saved to disk with the
application name and the .PBA file type.