Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 13)

Getting Started 2-1
C
HAPTER
2
Getting Started
This chapter provides:
• A description of the PROFIBUS module components
• A list of parts shipped with the module
• A list of user-supplied parts required for installing the module
• An installation checklist
2.1 PROFIBUS Module Components
ΠStatus Indicators Three LEDs to indicate the status of the
connected drive, module, and network.
Refer to chapter 8 for more information
about the LEDs.
 DPI Connector A 20-pin, single-row shrouded male
header. An Internal Interface cable
connects to this connector and a
connector on the drive.
Ž PROFIBUS
Connector A 9-pin, female D-Sub connector.
 Node Address
Switches Switches to set the node address.
Figure 2.1 – Components of the PROFIBUS Module
Œ

Ž
