2 module diagnostic items – Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module User Manual
Page 95
Troubleshooting the PROFIBUS Module and Network
8-5
8.2
Module Diagnostic Items
Table 8.4 lists diagnostic items that can be accessed using
VS Utilities software or the LCD OIM.
Table 8.4 – Module Diagnostic Items
No.
Event
Description
1
Common Logic
Cmd
The current value of the Common Logic
Command being transmitted to the host.
2
Prod Logic Cmd
The current value of the Product-specific Logic
Command being transmitted to the host.
3
Reference
The current value of the Product-specific
Reference being transmitted to the host.
4
Common Logic Sts The current value of the Common Logic Status
being received from the host.
5
Prod Logic Sts
The current value of the Product-Specific Status
being received from the host.
6
Feedback
The current value of the Product-Specific
Feedback being received from the host.
7
Datalink A1 In
The current value of Datalink A1 being
transmitted to the host. (Value of 0 if datalink is
not used).
8
Datalink A2 In
The current value of Datalink A2 being
transmitted to the host. (Value of 0 if datalink is
not used).
9
Datalink B1 In
The current value of Datalink B1 being
transmitted to the host. (Value of 0 if Datalink is
not used).
10
Datalink B2 In
The current value of Datalink B2 being
transmitted to the host. (Value of 0 if Datalink is
not used).
11
Datalink C1 In
The current value of Datalink C1 being
transmitted to the host. (Value of 0 if Datalink not
used).
12
Datalink C2 In
The current value of Datalink C2 being
transmitted to the host. (Value of 0 if Datalink is
not used).
13
Datalink D1 In
The current value of Datalink D1 being
transmitted to the host. (Value of 0 if Datalink is
not used).
14
Datalink D2 In
The current value of Datalink D2 being
transmitted to the host. (Value of 0 if Datalink is
not used).
15
Datalink A1 Out
The current value of Datalink A1 being received
from the host.