Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 36)

5-4 PROFIBUS Communications Module
Step 3. Find the directory location of the data file(s) you wish to
add (typically, the source location is a floppy disk in drive
A:). “Rele0573.gsd” is the GSD file for the
RECOMM-PBUS as shown in figure 5.5.
Step 4. Select “Rele0573.gsd ” for the RECOMM-PBUS and click
Open.
Step 5. Click on the (+) sign of the Slaves folder as shown in
figure 5.6.
The software tool will automatically create a Reliance Electric
sub-folder (in the Slaves folder) if it does not already exist. The
RECOMM-PBUS is now shown in the library and the software tool
is now ready to configure a RECOMM-PBUS on a PROFIBUS
network.
Figure 5.5 – Adding the GSD File for the RECOMM-PBUS
Figure 5.6 – Masters/Slaves Library Window
Rele0573.gsd
Rele0573.gsd
Reliance Electric
RECOMM-PBUS [V1.001.01]