Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 16)

2-4 PROFIBUS Communications Module
❒ 8 Configure the scanner to communicate
with the module.
Use a network tool for PROFIBUS to
configure the master on the network.
Chapter 5,
Configuring
the
PROFIBUS
Scanner
❒ 9 Create a ladder logic program.
Use a programming tool to create a ladder
logic program that enables you to do the
following:
• Control the module and connected drive.
• Monitor or configure the drive using Explicit
Messages.
Chapter 6,
Using I/O
Messaging.
Chapter 7,
Using Explicit
Messaging
(Parameter
Protocol)
 Step Action Refer to: