Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 21)

Installing the PROFIBUS Module 3-5
3.5 Connecting the Module to the Drive
Step 1. Remove power from the drive.
Step 2. Use static control precautions.
Step 3. Connect the Internal Interface cable to the DPI port on the
drive and then to the DPI connector on the module.
Œ
15.24 cm (6 in) Internal Interface cable

DPI connector
Ž
PROFIBUS connector

Retaining screws

2.54 cm (1 in) Internal Interface cable
Figure 3.5 – DPI Ports and Internal Interface Cables

Ž

Œ
PROFIBUS Module

SP600 Drive
1-20 HP
SP600 AC Drive
Frame 2 and Larger