Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 48)

5-16 PROFIBUS Communications Module
Step 26. Datalink D is at word 8 in the M1/M0 files as shown in
figure 5.28.
Step 27. Parameter Access starts at word 10 in the M1/M0 files.
Note that Parameter Access uses 4 words (10-13). See
figure 5.29. Click OK when finished.
Step 28. Station 1 is now displayed in the network window. See
figure 5.30.
Figure 5.28 – SLC Address: M1/M0 (Datalink D)
Figure 5.29 – SLC Address M1/M0 (Parameter Access)
Figure 5.30 – Station 1 Network Window
Reliance Electric RECOMM-PBUS
Reliance Electric RECOMM-PBUS
[001]_RECOMM_PBUS (**)