Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 43)

Configuring the PROFIBUS Scanner 5-11
Step 16. The “Datalink B” module has now been added as shown
in figure 5.18.
Station 1 will also be configured to use Datalinks C1 and C2. The
SP600 drive uses 16-bit Datalinks.
Step 17. Click Add to continue adding modules. Select “Datalink C
(2x2bytes)” as shown in figure 5.19 and click OK.
Figure 5.18 – Modules: Datalink B Viewing Window
Figure 5.19 – Add Modules: Datalink C Selection Window
Reliance Electric RECOMM-PBUS