Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 41)

Configuring the PROFIBUS Scanner 5-9
Step 12. The “Ctrl/Stat & Ref/Fdbk” (2+2 bytes) module has now
been added as shown in figure 5.14.
Station 1 will be configured to use Datalinks A1 and A2. The SP600
drive uses 16-bit Datalinks.
Step 13. Click Add to continue adding modules. Select “Datalink A
(2x2bytes)” and click OK.
Figure 5.14 – Modules: Ctrl/Stat & Ref/Fdbk Viewing Window
Figure 5.15 – Add Modules: Datalink A Selection Window
Reliance Electric RECOMM-PBUS