Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 42)

5-10 PROFIBUS Communications Module
Step 14. The “Datalink A” module has now been added as shown
in figure 5.16.
Station 1 will also be configured to use Datalinks B1 and B2. The
SP600 drive uses 16-bit Datalinks.
Step 15. Click Add to continue adding modules. Select “Datalink B
(2x2 bytes)” and click OK.
Figure 5.16 – Modules: Datalink A Viewing Window
Figure 5.17 – Add Modules: Datalink B Selection Window
Reliance Electric RECOMM-PBUS