Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module User Manual
Page 45
Advertising
![background image](/manuals/581226/45/background.png)
Configuring the PROFIBUS Scanner
5-13
Step 20. Click Add to continue adding modules. Select “Parameter
Access” as shown in figure 5.22 and click OK.
Step 21. The “Parameter Access” module has now been added as
shown in figure 5.23.
Settings can be chosen to map Station modules to SLC addresses.
In our example, M1/M0 files are used for Input / Output.
Note that the Reference/Feedback (Ctrl/Stat & Ref/Fdbk) start at
word 0.
Figure 5.22 – Add Modules: Parameter Access Selection Window
Figure 5.23 – Modules: Parameter Access Viewing Window
Reliance Electric RECOMM-PBUS
Advertising