Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module - Manual (Page 25)

Configuring the PROFIBUS Module 4-1
C
HAPTER
4
Configuring the
PROFIBUS Module
Chapter 4 provides instructions and information for setting the
parameters in the module.
For a complete list of parameters, refer to Appendix B, PROFIBUS
Module Parameters. For definitions of terms in this chapter, refer to
the Glossary.
4.1 Configuration Tools
The PROFIBUS module stores parameters and other information in
its own non-volatile memory. Therefore, you must access the
module to view and edit its parameters. Table 4.1 lists the tools that
can be used to access the module parameters.
Table 4.1 – Configuration Tools
Tool Refer to:
VS Utilities Software VS Utilities online help
LCD OIM Section 4.2