3 gsd diagnostic messages – Rockwell Automation RECOMM-PBUS PROFIBUS Communications Module User Manual
Page 51
Configuring the PROFIBUS Scanner
5-19
Summary of the sample scanner configuration:
5.3
GSD Diagnostic Messages
In the case of invalid GSD module configuration, the peripheral will
send one of the messages shown in table 5.1.
Module
M0 / M1 Addressing
Station 1
Station 2
Logic Command / Status
0
14
Reference / Feedback
1
15
Datalink A1
2
16
Datalink A2
3
17
Datalink B1
4
18
Datalink B2
5
19
Datalink C1
6
20
Datalink C2
7
21
Datalink D1
8
22
Datalink D2
9
23
Parameter Access
10-13
24-27
Table 5.1 – GSD Diagnostic Messages
Fault
Description
No Ctrl/Stat & Ref/Fdbk
The Ctrl/Stat & Ref/Fdbk module
must always be used and placed
first in the configuration.
Module used more than
once
A GSD module has been used
more than once.
Not supported module
An unrecognized module has been
used in the configuration.