Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 105)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 105
The Data Collection Interface Properties dialog box
appears.
4. In the Computer hosting the interface list, select the name of
the computer on which you have installed the data server and
the FactoryTalk Historian Live Data Interface.
5. From the Startup Type list, choose Automatic.
6. Click Apply.
7. Click Start to start the data collection service. Wait until the
service status changes to Started.
8. Click OK.
The new Live Data Interface instance is added to the server
connection branch.
For each instance of the FactoryTalk Historian Live Data Interface,
a service (
FTLD) is created and started when you start the interface.
You define the service startup type (page 104) in the Data
Collection Interface Properties dialog box in the FactoryTalk
Administration Console.
To view the status of the services, open the Services dialog box
(
Start > All Programs > Administrative Tools > Services).
Live Data Interface Services