Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 150)

Appendix B Configuring the Advanced Server Components
150 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
3. Wait until the server is stopped and the Command Prompt
window is closed.
2. Start the server:
1. Go to Start > All Programs > Rockwell Software >
FactoryTalk Historian SE.
2. Right-click Start FactoryTalk Historian SE, and then
select Run as administrator.
The server starting process begins. The progress is displayed
in the Command Prompt window.
3. Wait until the server is started and the Command Prompt
window is closed.
To start a notification:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Explorer. The PI System Explorer
dialog box appears.
2. Under Notifications, select the notification that you want to
start.
3. On the toolbar, click .
4. In the confirmation message that appears, click Yes.
The notification is started.
Start Notifications