Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 139)

Configuring the Advanced Server Components Appendix B
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 139
To start the ACE Scheduler:
1. Go to Start > Administrative Tools > Services. The Services
dialog box appears.
2. In the right pane, find the PI ACE 2.x Scheduler service.
3. Right-click the service, and then click Start.
The service is started and its status is changed to Started.
To verify the ACE Scheduler status in the ACE Manager:
1. Go to Start > All Programs > PI System > PI-ACE Manager.
The PI ACE Manager dialog box appears.
2. In the explorer tree, expand the server item, if the scheduler
item is not visible.
3. Click the scheduler item.
A running PI ACE Scheduler is marked in green ( ), and the
current status is set to On.
To verify the ACE Scheduler status in the System Management
Tools:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools. The System
Management Tools dialog box appears.
2. Under Collectives and Servers, select the Historian server
whose data you want to check.
Start the ACE Scheduler
Verify the ACE Scheduler
Status