Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 18)

Chapter 2 Pre-Installation Tasks
18 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
To confirm that the TZ variable is not set on computers prior to
Windows 2008:
1. Go to Start > My Computer.
2. Right-click and select Properties.
3. In the System Properties dialog box, click the Advanced tab.
4. Click Environment Variables.
5. If the TZ variable is present, delete it.
6. If prompted, restart the computer.
To confirm that the TZ variable is not set on Windows Server
2008 and 2008 R2:
1. Go to Start > My Computer.
2. Right-click and select Properties.
3. Click Advanced system settings.
4. Click Environment Variables.
5. If the TZ variable is present, delete it.
6. If prompted, restart the computer.
We recommend that you use the default installation options.
If you want to use the SMT software installed on a FactoryTalk
Historian SE server computer to manage a FactoryTalk Historian
Live Data Interface installed on another computer, you must log on
to both computers with the same user name. (The user must have
administrator privileges on both computers.)
If you intend to use Web Services (page 51), one of the Advanced
Server (page 44) components, you need to configure the Internet
Information Services (IIS) first.
Learn About
Installation-related
Recommendations
Configure IIS for Advanced
Server