Rockwell Automation FactoryTalk Historian SE 4.0 Installation and Configuration Guide - Manual (Page 99)

Configuring FactoryTalk Historian Chapter 5
Rockwell Automation Publication HSE-IN025A-EN-E–September 2013 99
You can view current and archive data using System Management
Tools. In this section you will learn how to:
• View current data (page 99).
• View archive data (page 100).
To view current data being collected by the FactoryTalk
Historian SE server:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools. The System
Management Tools dialog box appears.
2. Under Collectives and Servers, select the FactoryTalk
Historian SE server whose data you want to view.
3. Under System Management Tools, select Data > Current
Values.
4. On the Tools menu, click Tag Search. The Tag Search dialog
box appears.
5. Use the default settings and click Search.
6. From the list of tags that appears in the search results, select
the tags you want to view, and click OK. The current values of
the tags are displayed in the right pane of the System
Management Tools dialog box.
If you want the server to start updating the values for the tag,
right-click it and select Start Updating Values.
Viewing Current and Archive
Data
Viewing Current Data